We use a soft washing process that utilizes biodegradable chemicals sprayed at low pressures (under 150 psi). We follow all shingle manufacturer guidelines to ensure your roof is cleaned in a safe, effective manner.

Pressure washing roofs can damage them if not done properly. High pressure water can remove protective granules from shingles and cause cracks and damage to the roof material. If a roof is in poor condition, pressure washing can make the situation worse and potentially cause leaks. It’s recommended to have a professional assess the roof’s condition before pressure washing and to use the lowest pressure possible to avoid damage.


Soft-washing and pressure washing are two methods used for cleaning surfaces such as roofs, siding, decks, and patios.

Pressure washing uses high-pressure water spray to blast away dirt and grime. This method can be effective in removing tough stains but can also cause damage to surfaces if not used properly or if the pressure is too high.

Soft-washing, on the other hand, uses a low-pressure spray and a special solution of detergents and biocides to clean surfaces. This method is gentler and less likely to cause damage, making it a better option for cleaning delicate or sensitive surfaces. The solution used in soft-washing is designed to target and remove specific types of dirt and grime, making it an effective option for a wide range of cleaning tasks.

In summary, pressure washing uses high-pressure water to clean, while soft-washing uses a low-pressure spray and a cleaning solution to clean. The latter is gentler and better suited for delicate surfaces.

in pressure washing, various chemicals can be used depending on the type of surface being cleaned and the type of dirt or stains being removed. Some common chemicals used in pressure washing include:

  • Detergents: Used to break down and remove grease, oil, and other organic substances.

  • Sodium Hypochlorite: Also known as bleach, this chemical can be used to remove mildew, algae, and other tough stains from surfaces.

  • Muriatic Acid: Used to clean masonry surfaces, such as concrete, and can also be used to remove hard water stains and rust.

  • Trisodium Phosphate (TSP): A strong cleaning agent that can be used to remove dirt, grime, and other types of buildup from surfaces.

It’s important to use caution when handling and applying these chemicals, as they can be hazardous and cause damage if not used properly. It’s also important to follow the manufacturer’s instructions and recommended dilution ratios to ensure safe and effective cleaning. In some cases, it may be best to hire a professional to handle the pressure washing, especially if you are not experienced in using these chemicals.

Pressure washing and soft washing methods can be safe for plants if done properly. The high-pressure water and cleaning solutions used in these methods can potentially damage or harm delicate plants and foliage. To protect plants, it’s important to take steps such as covering them with plastic sheeting, watering the area beforehand, or avoiding the use of harsh chemicals near the plants.

Soft washing is generally considered a safer option for plants as it uses a lower pressure spray and a cleaning solution that is designed to be gentle on surfaces. However, even with soft washing, it’s still important to take steps to protect delicate plants and foliage.

If you have concerns about the safety of your plants during the cleaning process, it’s best to consult with a professional who can assess the situation and make recommendations on the best cleaning methods and precautions to take.

Yes, there are ways to pressure wash the second or third story eves of a house. A common method is to use a ladder or a scaffold for access. Alternatively, a pressure washer with an extension wand or a telescoping pole can be used to reach high areas without the need for a ladder or scaffold.

However, it’s important to note that working at high elevations can be dangerous and it’s recommended to hire a professional with experience and the proper safety equipment to handle the task. A professional will also have the necessary tools and equipment to safely and effectively clean the eves without damaging the roof or surrounding areas.

Additionally, it’s important to check any local regulations or homeowner association rules regarding the use of ladders or pressure washers on the property before starting the cleaning process.

It depends on the type of pressure washing equipment being used. Some pressure washers have built-in tanks and can operate without being hooked up to a water source. Others require a connection to a water source, such as a garden hose or a faucet, to provide a constant flow of water.

If a connection to a water source is required, it’s important to make sure that the water pressure is adequate for the pressure washer being used. In some cases, an external water pump may be necessary to increase the water pressure.

It’s always best to consult with a professional or refer to the manufacturer’s instructions to determine the specific requirements and limitations of your pressure washer.

Yes, it’s possible for water to be forced under the siding when pressure washing from the ground. This can occur if the pressure of the water spray is too high or if the spray is aimed too close to the siding. Water that is forced under the siding can cause damage to the interior walls, insulation, and other parts of the building.

To prevent this from happening, it’s important to use the lowest pressure setting possible for the task and to aim the spray away from the siding. It’s also best to consult with a professional or refer to the manufacturer’s instructions to determine the proper pressure and spray pattern for your pressure washer.

In some cases, it may be necessary to use additional tools, such as surface cleaners or low-pressure nozzles, to minimize the risk of water being forced under the siding. A professional pressure washer will have the experience and equipment necessary to safely and effectively clean the siding without causing damage.

Yes, but partial roof washing is not a common service.  It involves cleaning specific areas of the roof, such as the gutters, eaves, or valleys, rather than cleaning the entire roof.

Partial roof washing can help improve the appearance of the roof and extend its lifespan by removing algae, moss, dirt, and other types of buildup that can cause damage to the roofing materials.

It’s important to note that partial roof washing may not be appropriate for all types of roofs and can be more difficult or dangerous than full roof washing, especially for steep or high-elevation roofs. It’s always best to consult with a professional to determine the best approach for your roof and to ensure that the cleaning is done safely and effectively.

Black streaks on a roof are typically caused by algae growth. The algae, known as Gloeocapsa Magma, feed on the limestone filler in asphalt shingles and produce a dark, unsightly stain. The streaks are most commonly found on north-facing roofs and roofs that receive little direct sunlight.

In addition to being unsightly, the streaks can also shorten the lifespan of the roof by retaining moisture, which can cause the shingles to deteriorate over time.

To remove the streaks, a professional roof cleaning service may use a combination of low-pressure washing and a special cleaning solution designed to kill the algae and remove the stains. Regular roof cleaning can help extend the life of the roof and improve its appearance.

The risk of damage to your property depends on several factors, including the type of surface being cleaned, the pressure of the water, and the cleaning solution being used.

In general, a professional pressure washing service will take steps to minimize the risk of damage to your property, such as using the lowest pressure setting necessary for the task and adjusting the pressure and spray pattern to match the surface being cleaned. They may also use specialized tools, such as surface cleaners or low-pressure nozzles, to help control the water pressure and minimize the risk of damage.

It’s important to note that some cleaning solutions may cause damage to certain materials, such as wood or delicate surfaces. A professional pressure washing service will take this into consideration and use the appropriate cleaning solution for your specific needs.

If you have concerns about damage to your property, it’s best to consult with a professional to determine the best approach for your specific cleaning needs and to ensure that the cleaning is done safely and effectively.

The lifespan of a soft wash treatment will depend on several factors, such as the type of surface being cleaned, the climate, and the amount of exposure to the elements.

In general, a soft wash treatment can last anywhere from several months to several years. The treatment will help to kill the algae, mold, and other growths that cause unsightly stains, and the surfaces will remain cleaner for a longer period of time compared to traditional pressure washing.

To maximize the lifespan of a soft wash treatment, it’s important to keep the surfaces clean and to maintain proper drainage to prevent water from pooling on the surfaces. Regular cleaning, such as sweeping or hose washing, can help to remove dirt and debris and prevent new growth from taking hold.

It’s also important to note that some surfaces, such as roofs, may require periodic cleaning to maintain their appearance and extend their lifespan. A professional soft wash service can provide recommendations for maintaining your specific surfaces.

No, not all pressure washing companies are the same. While the basic concept of pressure washing is the same across companies, there can be significant differences in terms of equipment, experience, training, and quality of service.

Some pressure washing companies may use low-quality equipment or cutting corners on cleaning solutions, which can result in subpar results and potential damage to your property. Other companies may have more experience and training, and use high-quality equipment and cleaning solutions to provide a more thorough and effective cleaning experience.

It’s important to do your research and select a reputable, professional pressure washing company that has a track record of providing quality service and delivering positive results. You can check online reviews, ask for references, and compare quotes from multiple companies to find the best fit for your specific needs.

We believe you will find we are different and better than 99% of the teams out there.

While it is possible to pressure wash your own property, there are several benefits to hiring a professional pressure washing company:

  1. Equipment: Professional pressure washing companies have access to specialized equipment and high-pressure washing systems that are not typically available to the average homeowner. This equipment can help to remove tough stains and dirt and achieve a more thorough cleaning.

  2. Expertise: Professional pressure washers have the training and experience to know how to clean different surfaces and materials properly, without causing damage. They understand the best techniques for removing stains and know how to adjust the pressure and cleaning solution for each specific surface.

  3. Safety: Pressure washing can be dangerous if you don’t know what you’re doing. Professional pressure washers are trained in safe operating procedures and have the necessary safety equipment to protect themselves and your property.

  4. Time-saving: Pressure washing can be a time-consuming and physically demanding task. Hiring a professional can save you time and allow you to focus on other tasks or activities.

  5. Better results: Professional pressure washers are able to achieve better results because of their experience, training, and specialized equipment. They can clean your property more effectively and thoroughly than you could on your own.

While it may be tempting to save money by pressure washing your own property, the investment in a professional service can provide many benefits and help ensure that your property is cleaned safely and effectively.

Yes, spider webs can be removed during a house wash. However, the specific process and methods used to remove spider webs may vary depending on the type of house wash being performed.

For example, during a soft wash, a cleaning solution is applied to the surfaces, which can help to dissolve and remove spider webs. During a pressure wash, high-pressure water can be used to blast away spider webs.

It’s important to note that not all pressure washing companies or services include spider web removal as part of their standard services. If you have a significant amount of spider webs that you would like removed, it’s best to discuss this with the pressure washing company ahead of time to ensure that they are able to accommodate your request.

We Want You To Know...


Super Awesome Benefits For You To Enjoy...

Affordable Prices

Fast Quotes

Licensed & Insured

100% Satisfaction